Tuesday, July 2, 2013

Scrapbook Layout Sketches Plus

You might not know that every month, in addition to the assembly instructions we provide with your collections, we create a layout sketch.



But this isn't just a sketch.

It's your very own assembly-line-style sketch with precise cutting instructions to help you finish it up in no time without waste! Oh, heavens, don't you hate wasting paper? It's almost as bad as never using paper and allowing it to languish unloved in your stash.

How 'bout we use the new Wisteria Layout Card to drum up some inspiration? (If you're a member of Club Scrap, a link to this sheet will arrive in your email inbox on shipping day.)

Select some brand spankin' new Wisteria papers from the "Gather" list:

8.5x11 Paper A - Light Purple Print
12x12 Paper B - White Print
8.5x11 Paper C - Celery Plain
12x12 Paper D - Dark Purple Plain
(2) 12x12 Paper E - Light Purple Plains

Trim the papers according to the step by step instructions and lay everything out as shown in the sketch. Just remember that this is simply a starting point. Rotating and changing things up is certainly your choice! I added several additional photos to the page. I like how I was able to use 11 pictures without it feeling too cluttered.

And my finished pages! Check out how this Virginia winery created a huge wall hanging above the tasting room bar by stringing corks through fishing line and hanging them to form the word "love."


For the title, paint Thickers with white acrylic paint, stamp with lettering and Amethyst ink, and layer onto a contrasting panel.

With Summer Camp happening right now, take your layout recipe cards for a spin! You'll rack up some points for your cabin in a jiffy!

Tricia

Monday, July 1, 2013

Carpet Tape Chronicles Revisited

Good Monday Morning Friends!

Last week, while browsing the DIY & Crafts area of Pinterest, I ran across this fantastic quilt design. Right away I knew I wanted to recreate it using an old favorite Club Scrap® technique.

quilt inspiration piece

A few years back Club Scrap made a video series that featured Carpet Tape, a super sticky double-sided adhesive tape used in laying carpet and found in most hardware stores. After refreshing my memory by watching the video on the Herringbone technique, I set out to recreate the basic pattern I found on the quilt. 

Click HERE to see the video. 
  
Here are the step by step instructions.

my collection of HPops

1. Cut strips of light to dark green card stocks in .25, .5, and .75 inch widths. I chose Raku metallic, Asian Artisan light green print, and All that Jazz dark green HPOPs

green cardstock strips

2. Cut strips of light to dark blue card stocks in .25, .5, .75 and 1.25 inch widths. I chose Versailles denim blue, Rhapsody blue, Written Word pale blue, and Scholarship navy blue HPOPs

3. Take a scrap of white copy paper (approx. 5x7 inches) and completely cover in carpet tape. Trim this sheet in half horizontally at 3.5 inches.

carpet tape adhered onto copy paper

4. Remove the carpet tape backing paper and carefully lay down the strips of card stock in a diagonal fashion, starting with the greens first.

piece trimmed and blue carpet tape backing removed

front of piece showing blue strips adhered to carpet tape

back of piece showing green strips adhered

5. Repeat with the blue card stock strips.

6. Trim the excess card stock from the perimeter of each of the carpet taped rectangles.

blue and green panels after trimming

7. Using a paper trimmer, cut into varying width strips. Lay them next to one another alternating between blue and green strips. The angles of the papers should run in opposite directions (all green stripes running one way and blue stripes running in the other.)

blue and green strips 

8. Using ATG tape adhesive, attach these strips to another piece of copy paper and trim off excess white paper. Tip: Attach the adhesive to the copy paper and then lay down the strips. I chose not to use more carpet tape for this step as it is quite thick and I didn't want to add any more weight to the panels.

strips adhered to copy paper backing

*I had leftover green strips which I put together by themselves.

Now that you have created these panels, you can create any type of project you choose.
I made three thank you cards with my carpet tape pieces.



Additional Club Scrap Products used:
Thanks. - Body and Soul Unmounted Rubber Stamp sheet
Green Handmade Cardstock - Evergreen Kit
Spruce Green - CS Hybrid Ink 
Sapphire Blue - CS Hybrid Ink

Additional items: 
shimmer ribbon from stash
white card stock die cut on Silhouette SD
kraft and white card bases from stash

Thanks so much for stopping by, and have a wonderful week!!

Julie Heyer