Gelli Art Orphan Cards + Free Instructions

Gelli Arts Gel Printing Plate

The Gelli Plate has quickly become my most favorite crafty tool. My fellow Club Scrap bloggers have also written articles about the wonders of this tool and you can check them all out.

Karen -- Branching Out with Trees
Tricia -- 8" Round = Happiness, Gelli Art Plates and CS Stencil Shapes, Graffiti's Gelli Plate Frame Up
Julie (that's me) -- Gelli Plate - Art Orphan Paper Pack

Here is a set of cards created with my Art Orphan Paper Pack and cutting instructions written for the March Card Sketch Challenge at the forum. (An "Art Orphan" is anything you've created using an art medium that is not yet a finished piece.)

Supplies:
Peacock 8.5x11" papers - feather print, red, green, gold, and white cardstock
Spring Chorus adhesive backed rhinestones
Time of Your Life UM sentiment
Bugs UM sentiments
Wildflowers UM sentiment
Club Scrap Hybrid Ink - Amethyst
Art Orphans trimmed to 4x5.25"
Card Sketch image source credit- Copyright © 2010 StarryNightsDiva. All rights reserved.
ALCM instructions free download

Papers prepared using free downloadable instructions.

Card 1

Darice Clock Embossing Folder (gift Retreat 2013) pressed onto wet acrylic paints on Gelli Plate.

Card 2

Big Deal Tiny Suits stamp onto paper after removing red acrylic paint from Gelli Plate.

Card 3

Stamp off technique using Neon Green Ink and blue paint impression of Versailles swirls mask.

Card 4

Multi-colored paints and inks on Gelli Plate, stamped repeatedly with 2010 Concrete Playground UM to remove colors.

Card 5

Sorrento mask laid onto paper while wet after removing color from Gelli Plate. Versailles swirl mask layer created with blue acrylic paint.

I hope you have a great week and are inspired to use a few "art orphans" of your own!

Julie

Gelli Plate - Art Orphan Paper Pack

Recently I participated in the Big Deal Blog Hop and shared the details on how to create your own paper pack on my CapeScrapper Blog.  Using Bookbinding, Padding and Laminating Glue and a stack of art orphans, created using my Gelli Plate, I now have a paper pack of artsy goodness.

Today I want to share how I created one of these papers in more detail.

Step 1. Squirt a few dots of red acrylic paint onto your Gelli Plate and roll on with a rubber brayer.

Step 2. Use the Big Deal tiny suits stamp from the Art Nouveau UM sheet to remove some of the red paint by dabbing it randomly over the wet painted surface.

Step 3. Place a sheet of plain white paper down onto the stamped Gelli Plate and remove.

Step 4. Wipe your Gelli plate clean between paint applications. Add dots of gold paint to the plate and roll flat with the brayer.  Lay a stencil (Full Circle 2012) on top of the wet paint and remove to the red painted paper. With another sheet of paper over the top of the wet stencil, burnish down onto red painted paper.

Step 5. Lay down a Masking stencil (Tahiti 2012) directly onto clean Gelli Plate. Add dots of white acrylic paint and roll on over the stencil.

Step 6. Carefully remove the stencil.

Step 7. Lay down the gold and red paper panel onto the wet white acrylic paint and burnish.

Step 8. Remove the paper to reveal the image.

Step 9. Stamp over the finished piece using the same Big Deal tiny suits Art Nouveau stamp and a checked stamp from the Concrete Playground 2010 Crafter Classic stamp set.

You can achieve so many different looks each time.

I made this card using a portion of the art orphan, a Take Wing red panel, Watercolor Blossoms "thinking of you" sentiment, and Big Deal brads.

Here are some of the other papers I created using a variety of stamps, stencils, masks, and paints.

Thanks so much for stopping by and hope you have a creative weekend.

Julie


Other Club Scrap Products used in creating the Gelli Plate art orphans
2003 Poetic feather and diamond wood mount stamp
2006 Collections script wood mount stamp
2012 Sorrento doily mask
2011 Versailles swirl mask
Neon Ink Dabbers Blue, Purple, Pink, and Green

Neon Card Mash Ups

Good Monday Morning Everyone!

I missed you all last week. While I was away from the blog, I was busy creating this colorful array of cards using a "Mash Up" of kits. I created backgrounds using an art orphan and print outs from this month's Graffiti digital kit. I used papers from the Science kit (the orange/yellow, blue, and purple) that worked so well with the prints from this month's kit and an assortment of past kit stamps.

So sit back and relax while I take you on a little tour of how I created some of my cards.

1. Print out the black and white digital print from the Graffiti Digital kit.

before

2. Grab your Neon Dabbers and color to your hearts content! I had so much fun with this. I added a bit of white paint dauber swipes to areas that were too dull gray for my liking. It lightened the piece up a bit.

3. Let your paper dry and then add interest to your colored piece using a white Uni-ball Signo Broad pigment ink pen.

After

4. Print out some of the other colorful prints to use for backgrounds for your cards on matte photo paper.

5. Marya and Anne Marie host a card sketch challenge on the Club Scrap Community Forum and I created these cards using tissue tape colored with Neon Dabbers. I also used the fun mini chalkboard as my template for the hole to be cut out of the front of the card.

6. Stamp the "you are 2 COOL" images in white dauber paint (make sure you clean off your stamps so the paint doesn't dry on them) and add a bit of Neon Pink Dabber ink to the outside edge of the chalkboard. Trace the chalkboard with white pen and cut with a craft knife.

7. Save the cut out to be used on a second card. Check out this LINK to learn how to create a dimensional star. Do you recognize this art orphan I used for the background paper? It was created using the plastic wrap technique I shared on a previous blog post which you can find HERE. Stamp the Take Wing greeting directly onto the background paper.

8. Stamp the Graffiti spritz drip image in all the Neon Dabber colors to create this rainbow effect.  Stamp directly over the image when dry using black ink using the Take Wing stamps.

9. Now it is time to create your A2 cards. Cut black and white 8.5x11" cardstock horizontally at 5.5 and score each 5.5x8.5" piece horizontally at 4.25".  This will result in two A2 size greeting card bases from each sheet of cardstock.

Here are all the cards I created using the above techniques.

Digital Black and White print colored w/ Neon Dabbers, Science Purple and Orange mats, Neon Doodles sentiment, and Graffiti fiber.

Digital Black and White print colored w/ Neon Dabbers, Black card base and panel edged with white paint, Neon Doodles sentiment, and Graffiti fiber. 

Digital Black and White print colored w/ Neon Dabbers,  Science Blue and Orange mats, Take Wing sentiment, and Graffiti fiber. 

Digital Color print, Science Blue mat, Memoirs splat stamp, Graffiti sentiments and fiber

Digital Color print, Science Blue mat with white paint edges,  Graffiti sentiment and fiber

Digital Color print, Science Purple mat with white paint edges, Take Wing sentiment, and Graffiti fiber

Card Sketch Challenge card #1 Graffiti sentiments stamped on mini chalkboard.

Card Sketch Challenge card #2 Take Wing sentiment and images on white star.

Graffiti Spritz Drip rainbow, Science Purple mat, Take Wing sentiment and feather. 

Thanks for stopping by and be sure to join me and my Club Scrap enthusiasts this Wednesday January 29th for our Graffiti Blog Hop!

SPOILER!

I will be sharing a fun project with you at my CapeCodScrapper Blog.  Be sure to check out what I created to store all of my colorful cards!

Julie